Part 1: Design the Local Area Network

[paste your network diagram here]

 

Part 2: Create the basic switch configurations

2.1 Cable the network

Describe in a few sentences which devices connect to which other devices using what

specific kind of cable, on which specific interfaces? For example:

1. I connect an Ethernet cable on port 1 on device A to port 1 on device B.

2.2. Configure the basic switch functions

Describe the basic switch configuration here as if you are entering the commands into the

devices. For example:

1. I add an enable password using enable password p@ssw0rd

2.3 Configure the computers

Describe the configuration you enter into each computer. For example:

1. I add an ip address of 192.168.1.2 with a subnet mask of 255.255.255.0 and

gateway of 192.168.1.1 to the wired Ethernet interface.

2.4 Test and Validate Connectivity

Describe how you test and validate the above is functioning correctly per the project

specifications. For example:

1. I ping 192.168.1.1 from PC-A and the result is reply from 192.168.1.1

 

Part 3: Define the VLANs

Describe the VLAN switch configurations here using the format from part 2. Be sure to describe

how you test and validate the VLAN implementation.

 

Part 4: Implement VLAN Trunking

Describe the VLAN trunking switch configurations here using the same format as the prior two

parts. Be sure to describe how you test and validate the VLAN implementation.

We can handle this paper for you

We Guarantee ZERO Plagiarism ZERO AI

Done by Professional writers from scratch